Note: These documents are in pdf format and require Adobe Acrobat Reader to view and print.

SMEMA 1.2 Mechanical Equipment Interface Standard
The SMEMA machine interface standards were developed to facilitate the interface of equipment used in the manufacture of surface-mounted printed circuit boards. This standard is for Mechanical interfaces.

SMEMA 3.1 Fiducial Mark Standard
This SMEMA standard is for fiducial marks. It was developed to facilitate the accurate placement of components on printed circuit boards.

SMEMA 4 Reflow Terms and Definitions

SMEMA 5 Screen Printing Terms and Definitions

SMEMA 6 Electronics Cleaning Terms and Definitions (as they relate to printed circuit assembly cleaning)

SMEMA 7 Fluid Dispensing Terms and Definitions
This document is intended to clarify terms used in the area of fluid dispensing. As is often the case, different terms are used by different manufacturers to convey a similar meaning. Common interchangeable terms are shown in parenthesis and the reader should not infer one term is preferred over the other.

SMEMA Standard Recipe File Format Specification
The purpose of this specification is to outline the requirements that an SRFF file must meet. The specification describes the file format, outlines the file sections, and indicates how data should be represented through objects. Objects can either be vendor independent (generic objects defined in this document) or vendor specific objects (objects created by a vendor). This document also includes error codes that should be used to report specific information about improperly constructed files. General guidelines for producing an SRFF file and vendor specific objects are also included.